documentation. Copyright (c) 2002-2005 Politecnico di Torino. Copyright (c) 2005-2007
CACE Technologies. All rights reserved.
2007 Translated By CoffeeCat Studio
数据结构 | |
| struct | activehosts |
| Keeps a list of all the opened connections in the active mode. More... | |
| struct | rpcap_header |
| Common header for all the RPCAP messages. More... | |
| struct | rpcap_findalldevs_if |
| Format of the message for the interface description (findalldevs command). More... | |
| struct | rpcap_findalldevs_ifaddr |
| Format of the message for the address listing (findalldevs command). More... | |
| struct | rpcap_openreply |
| Format of the message of the connection opening reply (open command). More... | |
| struct | rpcap_startcapreq |
| Format of the message that starts a remote capture (startcap command). More... | |
| struct | rpcap_startcapreply |
| Format of the reply message that devoted to start a remote capture (startcap reply command). More... | |
| struct | rpcap_pkthdr |
| Format of the header which encapsulates captured packets when transmitted on the network. More... | |
| struct | rpcap_filter |
| General header used for the pcap_setfilter() command; keeps just the number of BPF instructions. More... | |
| struct | rpcap_filterbpf_insn |
| Structure that keeps a single BPF instuction; it is repeated 'ninsn' times according to the 'rpcap_filterbpf' header. More... | |
| struct | rpcap_auth |
| Structure that keeps the data required for the authentication on the remote host. More... | |
| struct | rpcap_stats |
| Structure that keeps the statistics about the number of packets captured, dropped, etc. More... | |
| struct | rpcap_sampling |
| Structure that is needed to set sampling parameters. More... | |
定义 | |
| #define | RPCAP_DEFAULT_NETPORT "2002" |
| #define | RPCAP_DEFAULT_NETPORT_ACTIVE "2003" |
| #define | RPCAP_DEFAULT_NETADDR "" |
| #define | RPCAP_VERSION 0 |
| #define | RPCAP_TIMEOUT_INIT 90 |
| #define | RPCAP_TIMEOUT_RUNTIME 180 |
| #define | RPCAP_ACTIVE_WAIT 30 |
| #define | RPCAP_SUSPEND_WRONGAUTH 1 |
| #define | RPCAP_NETBUF_SIZE 64000 |
| Buffer used by socket functions to send-receive packets. In case you plan to have messages larger than this value, you have to increase it. | |
| #define | RPCAP_HOSTLIST_SEP " ,;\n\r" |
| Separators used for the host list. | |
| #define | RPCAP_MSG_ERROR 1 |
| #define | RPCAP_MSG_FINDALLIF_REQ 2 |
| #define | RPCAP_MSG_OPEN_REQ 3 |
| #define | RPCAP_MSG_STARTCAP_REQ 4 |
| #define | RPCAP_MSG_UPDATEFILTER_REQ 5 |
| #define | RPCAP_MSG_CLOSE 6 |
| #define | RPCAP_MSG_PACKET 7 |
| #define | RPCAP_MSG_AUTH_REQ 8 |
| #define | RPCAP_MSG_STATS_REQ 9 |
| #define | RPCAP_MSG_ENDCAP_REQ 10 |
| #define | RPCAP_MSG_SETSAMPLING_REQ 11 |
| #define | RPCAP_MSG_FINDALLIF_REPLY (128+RPCAP_MSG_FINDALLIF_REQ) |
| #define | RPCAP_MSG_OPEN_REPLY (128+RPCAP_MSG_OPEN_REQ) |
| #define | RPCAP_MSG_STARTCAP_REPLY (128+RPCAP_MSG_STARTCAP_REQ) |
| #define | RPCAP_MSG_UPDATEFILTER_REPLY (128+RPCAP_MSG_UPDATEFILTER_REQ) |
| #define | RPCAP_MSG_AUTH_REPLY (128+RPCAP_MSG_AUTH_REQ) |
| #define | RPCAP_MSG_STATS_REPLY (128+RPCAP_MSG_STATS_REQ) |
| #define | RPCAP_MSG_ENDCAP_REPLY (128+RPCAP_MSG_ENDCAP_REQ) |
| #define | RPCAP_MSG_SETSAMPLING_REPLY (128+RPCAP_MSG_SETSAMPLING_REQ) |
| #define | RPCAP_STARTCAPREQ_FLAG_PROMISC 1 |
| #define | RPCAP_STARTCAPREQ_FLAG_DGRAM 2 |
| #define | RPCAP_STARTCAPREQ_FLAG_SERVEROPEN 4 |
| #define | RPCAP_STARTCAPREQ_FLAG_INBOUND 8 |
| #define | RPCAP_STARTCAPREQ_FLAG_OUTBOUND 16 |
| #define | RPCAP_UPDATEFILTER_BPF 1 |
| #define | PCAP_ERR_NETW 1 |
| #define | PCAP_ERR_INITTIMEOUT 2 |
| #define | PCAP_ERR_AUTH 3 |
| #define | PCAP_ERR_FINDALLIF 4 |
| #define | PCAP_ERR_NOREMOTEIF 5 |
| #define | PCAP_ERR_OPEN 6 |
| #define | PCAP_ERR_UPDATEFILTER 7 |
| #define | PCAP_ERR_GETSTATS 8 |
| #define | PCAP_ERR_READEX 9 |
| #define | PCAP_ERR_HOSTNOAUTH 10 |
| #define | PCAP_ERR_REMOTEACCEPT 11 |
| #define | PCAP_ERR_STARTCAPTURE 12 |
| #define | PCAP_ERR_ENDCAPTURE 13 |
| #define | PCAP_ERR_RUNTIMETIMEOUT 14 |
| #define | PCAP_ERR_SETSAMPLING 15 |
| #define | PCAP_ERR_WRONGMSG 16 |
| #define | PCAP_ERR_WRONGVER 17 |
自定义类型 | |
| typedef unsigned char | uint8 |
| Provides an 8-bits unsigned integer. | |
| typedef unsigned short | uint16 |
| Provides a 16-bits unsigned integer. | |
| typedef unsigned int | uint32 |
| Provides a 32-bits unsigned integer. | |
| typedef int | int32 |
| Provides a 32-bits integer. | |
| #define PCAP_ERR_AUTH 3 |
Generic authentication error
Definition at line 312 of file pcap-remote.h.
| #define PCAP_ERR_ENDCAPTURE 13 |
Generic pcap_endcapture error
Definition at line 322 of file pcap-remote.h.
| #define PCAP_ERR_FINDALLIF 4 |
Generic findalldevs error
Definition at line 313 of file pcap-remote.h.
| #define PCAP_ERR_GETSTATS 8 |
Generic pcap_stats error
Definition at line 317 of file pcap-remote.h.
| #define PCAP_ERR_HOSTNOAUTH 10 |
The host is not authorized to connect to this server
Definition at line 319 of file pcap-remote.h.
| #define PCAP_ERR_INITTIMEOUT 2 |
The RPCAP initial timeout has expired
Definition at line 311 of file pcap-remote.h.
| #define PCAP_ERR_NETW 1 |
Network error
Definition at line 310 of file pcap-remote.h.
| #define PCAP_ERR_NOREMOTEIF 5 |
The findalldevs was ok, but the remote end had no interfaces to list
Definition at line 314 of file pcap-remote.h.
| #define PCAP_ERR_OPEN 6 |
Generic pcap_open error
Definition at line 315 of file pcap-remote.h.
| #define PCAP_ERR_READEX 9 |
Generic pcap_next_ex error
Definition at line 318 of file pcap-remote.h.
| #define PCAP_ERR_REMOTEACCEPT 11 |
Generic pcap_remoteaccept error
Definition at line 320 of file pcap-remote.h.
| #define PCAP_ERR_RUNTIMETIMEOUT 14 |
The RPCAP run-time timeout has expired
Definition at line 323 of file pcap-remote.h.
| #define PCAP_ERR_SETSAMPLING 15 |
Error diring the settings of sampling parameters
Definition at line 324 of file pcap-remote.h.
| #define PCAP_ERR_STARTCAPTURE 12 |
Generic pcap_startcapture error
Definition at line 321 of file pcap-remote.h.
| #define PCAP_ERR_UPDATEFILTER 7 |
Generic updatefilter error
Definition at line 316 of file pcap-remote.h.
| #define PCAP_ERR_WRONGMSG 16 |
The other end endpoint sent a message which has not been recognized
Definition at line 325 of file pcap-remote.h.
| #define PCAP_ERR_WRONGVER 17 |
The other end endpoint ahs a version number that is not compatible with our
Definition at line 326 of file pcap-remote.h.
| #define RPCAP_ACTIVE_WAIT 30 |
Waiting time betweek two attempts to open a connection, in active mode (default: 30 sec)
Definition at line 91 of file pcap-remote.h.
| #define RPCAP_DEFAULT_NETADDR "" |
Default network address on which the RPCAP daemon binds to.
Definition at line 87 of file pcap-remote.h.
| #define RPCAP_DEFAULT_NETPORT "2002" |
Default port on which the RPCAP daemon is waiting for connections.
Definition at line 84 of file pcap-remote.h.
| #define RPCAP_DEFAULT_NETPORT_ACTIVE "2003" |
Default port on which the client workstation is waiting for connections in case of active mode.
Definition at line 86 of file pcap-remote.h.
| #define RPCAP_HOSTLIST_SEP " ,;\n\r" |
Separators used for the host list.
It is used:
Definition at line 108 of file pcap-remote.h.
| #define RPCAP_MSG_AUTH_REPLY (128+RPCAP_MSG_AUTH_REQ) |
Sends a message that says 'ok, authorization successful'
Definition at line 295 of file pcap-remote.h.
| #define RPCAP_MSG_AUTH_REQ 8 |
Message that keeps the authentication parameters
Definition at line 286 of file pcap-remote.h.
| #define RPCAP_MSG_CLOSE 6 |
Close the connection with the remote peer
Definition at line 284 of file pcap-remote.h.
| #define RPCAP_MSG_ENDCAP_REPLY (128+RPCAP_MSG_ENDCAP_REQ) |
Confirms that the capture stopped succesfully
Definition at line 297 of file pcap-remote.h.
| #define RPCAP_MSG_ENDCAP_REQ 10 |
Stops the current capture, keeping the device open
Definition at line 288 of file pcap-remote.h.
| #define RPCAP_MSG_ERROR 1 |
Message that keeps an error notification
Definition at line 279 of file pcap-remote.h.
| #define RPCAP_MSG_FINDALLIF_REPLY (128+RPCAP_MSG_FINDALLIF_REQ) |
Keeps the list of all the remote interfaces
Definition at line 291 of file pcap-remote.h.
| #define RPCAP_MSG_FINDALLIF_REQ 2 |
Request to list all the remote interfaces
Definition at line 280 of file pcap-remote.h.
| #define RPCAP_MSG_OPEN_REPLY (128+RPCAP_MSG_OPEN_REQ) |
The remote device has been opened correctly
Definition at line 292 of file pcap-remote.h.
| #define RPCAP_MSG_OPEN_REQ 3 |
Request to open a remote device
Definition at line 281 of file pcap-remote.h.
| #define RPCAP_MSG_PACKET 7 |
This is a 'data' message, which carries a network packet
Definition at line 285 of file pcap-remote.h.
| #define RPCAP_MSG_SETSAMPLING_REPLY (128+RPCAP_MSG_SETSAMPLING_REQ) |
Confirms that the capture stopped succesfully
Definition at line 298 of file pcap-remote.h.
| #define RPCAP_MSG_SETSAMPLING_REQ 11 |
Sset sampling parameters
Definition at line 289 of file pcap-remote.h.
| #define RPCAP_MSG_STARTCAP_REPLY (128+RPCAP_MSG_STARTCAP_REQ) |
The capture is staarting correctly
Definition at line 293 of file pcap-remote.h.
| #define RPCAP_MSG_STARTCAP_REQ 4 |
Request to start a capture on a remote device
Definition at line 282 of file pcap-remote.h.
| #define RPCAP_MSG_STATS_REPLY (128+RPCAP_MSG_STATS_REQ) |
Message that keeps the network statistics
Definition at line 296 of file pcap-remote.h.
| #define RPCAP_MSG_STATS_REQ 9 |
It requires to have network statistics
Definition at line 287 of file pcap-remote.h.
| #define RPCAP_MSG_UPDATEFILTER_REPLY (128+RPCAP_MSG_UPDATEFILTER_REQ) |
The filter has been applied correctly on the remote device
Definition at line 294 of file pcap-remote.h.
| #define RPCAP_MSG_UPDATEFILTER_REQ 5 |
Send a compiled filter into the remote device
Definition at line 283 of file pcap-remote.h.
| #define RPCAP_NETBUF_SIZE 64000 |
Buffer used by socket functions to send-receive packets. In case you plan to have messages larger than this value, you have to increase it.
Definition at line 98 of file pcap-remote.h.
| #define RPCAP_STARTCAPREQ_FLAG_DGRAM 2 |
Use a datagram (i.e. UDP) connection for the data stream (default: use TCP)
Definition at line 301 of file pcap-remote.h.
| #define RPCAP_STARTCAPREQ_FLAG_INBOUND 8 |
Capture only inbound packets (take care: the flag has no effects with promiscuous enabled)
Definition at line 303 of file pcap-remote.h.
| #define RPCAP_STARTCAPREQ_FLAG_OUTBOUND 16 |
Capture only outbound packets (take care: the flag has no effects with promiscuous enabled)
Definition at line 304 of file pcap-remote.h.
| #define RPCAP_STARTCAPREQ_FLAG_PROMISC 1 |
Enables promiscuous mode (default: disabled)
Definition at line 300 of file pcap-remote.h.
| #define RPCAP_STARTCAPREQ_FLAG_SERVEROPEN 4 |
The server has to open the data connection toward the client
Definition at line 302 of file pcap-remote.h.
| #define RPCAP_SUSPEND_WRONGAUTH 1 |
If the authentication is wrong, stops 1 sec before accepting a new auth message
Definition at line 92 of file pcap-remote.h.
| #define RPCAP_TIMEOUT_INIT 90 |
Initial timeout for RPCAP connections (default: 90 sec)
Definition at line 89 of file pcap-remote.h.
| #define RPCAP_TIMEOUT_RUNTIME 180 |
Run-time timeout for RPCAP connections (default: 3 min)
Definition at line 90 of file pcap-remote.h.
| #define RPCAP_UPDATEFILTER_BPF 1 |
This code tells us that the filter is encoded with the BPF/NPF syntax
Definition at line 306 of file pcap-remote.h.
| #define RPCAP_VERSION 0 |
Present version of the RPCAP protocol (0 = Experimental).
Definition at line 88 of file pcap-remote.h.
| typedef int int32 |
| typedef unsigned short uint16 |
| typedef unsigned int uint32 |
| typedef unsigned char uint8 |
documentation. Copyright (c) 2002-2005 Politecnico di Torino. Copyright (c) 2005-2007
CACE Technologies. All rights reserved.
2007 Translated By CoffeeCat Studio